Makita MAC2400 Big Bore 2.5 HP Air Compressor Review And Deals
Hi friend and welcome to my review of the Makita MAC2400 Big Bore 2.5 HP Air Compressor.
In this straight to the point review you will find the main pros and cons of the Makita MAC2400 Air Compressor, the key features of it and some helpful feedback from people who purchased this air compressor online.
Short Summary About The Makita MAC2400 Compressor
The Makita MAC2400 Big Bore 2.5 HP Air Compressor is reliable and robust equipment that delivers industrial strength power. It is very well designed and performs efficiently, over long periods of operation.
It has a 2.5 HP 4 pole motor that is capable of ensuring higher productivity as it produces 4.2 CFM at 90 PSI. The 4.2-gallon tank has the ability to sustain an operating pressure of 130 PSI.
This compressor has a big bore engineered pump with a cast iron cylinder which ensures that there is an increased output from higher compression and the faster recovery as a result of greater bore and stroke. It also ensures longer durability.
There is a higher air intake due to the large air filter which, in turn, makes it more efficient. Moreover, the use of oil for lubrication makes it very efficient and results in the pump remaining cooler, while also suffering from minimal wear and tear.
The RPM at which the unit runs is almost half compared to similar equipment from other manufacturers. This helps make the motor last much longer, while also helping to reduce the output noise.
The unit also has the inherent protection against tripping and sudden unexpected failure of the motor as it draws a low current. The roll cage construction gives it the much needed protection as well as the ability to withstand even the harshest job site conditions.
General Details Makita MAC2400 Compressor
|Product Dimensions||20 x 18 x 18.8 inches|
|Average Rating Based On 314 Votes||4.6/5|
|Percentage Of Positive Reviews||97%|
The Pros And Cons Of The Makita MAC2400 Air Compressor
- The Makita MAC2400 Big Bore 2.5 HP Air Compressor has low noise of 79 dB which can increase its utility in other areas such as in cleaning and inflating tires.
- It has a much lower RPM that keeps it cooler and also increases the lifespan of the motor.
- Less chance of tripping or motor failure due the low AMP consumption.
- Its rugged, high quality construction makes it withstand severe job site conditions and also makes it last longer.
- The unit is heavier in comparison to other models.
- Depending on the application, the capacity of the tanks may be insufficient, requiring frequent recharging.
The Bottom Line
The Makita MAC2400 Big Bore 2.5 HP Air Compressor is a product that gives good value for the money spent. It is a reliable unit that performs well in diverse work environments and it is very efficient, quiet, and provides a good output.
The maintenance part is also very easy due to externally visible indicators such as the one that shows the oil level. The rugged construction prevents damage and makes the product last longer.
Overall, this product appears to be well ahead of competition in its class and price range due to its performance and excellent build quality.
Some helpful feedbacks from people who used this air compressor:
Makita Mac 2400 it’s pretty impressive air compressor. It’s really quiet oil filled compressor, a nice big air filter on here which is one of the things you really like about this. It’s not just a felt you know kind of insert, it’s a nice big as you can make sure they’re the pleated air filter.
You’ve got your regulator here and then two outlets on the front of it, here there are the two tanks back there the motor in there in the middle. And what really good that lets air cool off before it gets in the tanks it’s really quiet too.
It recycles pretty quick and it’s you know amazingly it’s really a quiet compressor. Really you know it’s nice you can just put it in the corner of the house there and just let it run and you can still listen to a podcast and talk on the phone.
It should be noted, in this model, there is a good air filter and definitely a nice compressor. Let’s look at the specs: 4.2 cubic feet a minute at 90 psi, so it’s a, puts out a decent amount of air enough for a couple of nailers.
I chose the MAC 2400 by Makita it comes with a 2.5 horsepower motor, with a 4.2-gallon tank at 90 psi and it is extremely quiet. Well made and well built, extremely well engineered. I also went with the flex seal, max hose by flex seal. This company is marketed for a long time, and the reviews speak for itself. I got the quarter inch inner diameter hose 50 foot it comes with the swivel which is nice.
In my shop I constantly have their compressor running I always have the air hose around my assembly table I try to keep as much dust as possible out of my lip. So I’m constantly about every hour I blow it out real quick. And to have the air compressor built up with pressure and not constantly running is something that I was looking for. So if you’re in the market for a new air compressor I highly recommend Makita MAC2400.
I used this compressor (Mac 2400) a few months. There is 4.8 gallon you know you can read there 4 cubic feet a minute at 90 psi. Nice big air compared filter over here really like that. A nice big air filter there weird know how it’s ended up with those pleats getting crunched. Cooling fins on the pressure line coming out of the compressor there which is really nice, really actually you get very little water coming out of the drain on the back of the tanks over here.
Almost no water even after it’s all day it’s pretty impressive. Two tanks there, I will say this sucker is heavy, weight nicely constructed piece of equipment. I think it weighs like you know 80 pounds something like that. Oilfield compressor right there you’ve got your reset switch for the motor back in there should something go wrong with it. It comes empty you do have to fill it up with oil and run it for 20 minutes with the valve open. The whole process the regulator seems to work pretty well on it.
You know holds pressure just like I should definitely know no complaints with it it does what it’s supposed to do. I’m really sure about longevity because I’ve not had it that long but yeah it’s a great little compressor. I mean it’s nice and solid. Really happy with it you know it’s really just nice that it’s so quiet and you know it has no trouble keeping up with a sighting nail or when you’re going through coils ever you know five or ten minutes something like that just. So it’s pretty cool definitely quite happy with it so anyway.